Ball Valve 316 Stainless Steel PTFE Seat Female Male ISO BSPP 1/2 in 3/4inch Ball Valves

• Customization: Available
• Media: Gas
• Material: Stainless Steel
• Function: Bypass-Valve
• Temperature: High Temperature
• Standard: ISO9001
• Application: Industrial Usage, Water Industrial Usage
• Customized Support: OEM, ODM
• Power: Manual
• Port Size: 1/8"
• Temperature of Media: Medium Temperature
• Product Name: Stainless Steel 5 Way Ball Valve
• Body Material: Stainless Steel 316
• Connection: Female Thread
• Trademark: XQ-lok, or according to your requirements
• Origin: China
• HS Code: 7307290000
• Production Capacity: 1000

Product Description

Instrumentation 1/8" Female NPT Switching 5 way Ball Valves

stainless steel 5 way ball valve
1. Hardened valve stem
2. Specially coated packing bolt promise better locking, sealing, and lubrication
3. 5 Spring discs prevent leakage because of temperature differences
4. High pressure Nitrogen test
5. Close and open valve handle repeatedly to test out leakage
6. Inner part of the valve handle is casting stainless steel

 

Specification

Item	Value
Product name	Instrumentation 1/8" Female NPT Switching 5 way Ball Valves
Material	SS 316L, SS 316, SS304
Tube fitting Size	1/8" to 1/2" for inch tube, 3 mm to 12 mm for metric tube
Thread size	1/8" to 1/2"
Connection	Dual Ferrule Tube fitting/ Female/ Male
Thread series	NPT BSPP BSPT
Normal pressure	1000 psi to 2000 psi
Normal temperature	-40 to 300°F (-40 to 148°C)
Media	Oil, Water, Gas and other non-corrosive
Packing	PTFE
Flow Pattern	Straight/Angle/3 way/4 way/5 way/6 way/7 way

Product Features

1. Maximum operating pressure up to 2500 psi (172 bar).

2. Operating temperature range: 10°C ~ 65°C (50°F ~ 150°F).

3. One-piece construction of the female body effectively prevents leakage.

4. Flow paths indicated by handle direction and 120° interval are connected in two, see illustration.

5. The interface form is: NPT thread.

6. The two-position six-way ball valve is used to control the conversion of three inlet and outlet flow paths.

7. The handle is equipped with a positioning spring pin, which can make the orifice accurately positioned.

8. Panel mounting is available.

9. Excellent top packing seal ensures reliable sealing. Top gland design makes the valve adjustable in-line.

10. Cleaned in accordance with ASTM G93C, degreased in accordance with CGA G-4.1.

11. Factory test condition: 1000 psi compressed air (use pressures above 1000 psi should be adjusted to prevent leakage).

Important information about ball valves

1. Instrumentation ball valves are only suitable for alternating operating temperatures in the temperature range of 10ºC~65ºC and constant operating temperatures up to 90ºC; (the alternating operating temperature of the low-temperature compensation type is -10ºC~65ºC)

(The low temperature compensation type has an alternating operating temperature of -10ºC~65ºC)

2. The design of the six-way ball valve is limited to fully open or fully closed position operation;

3. The initial operating torque will be higher when the ball valve has not been operated on or off for a period of time;

4. instrumentation ball valves will lose their initial packing sealing force due to excessive alternating temperatures;

5. Packing adjustment may be required during the valve's service life to prevent leakage, especially if a significant reduction in handle torque is observed.

Testing

Six-way ball valves are 100% pressure tested with 500 psig (3.4 bar) nitrogen prior to shipment;

The remaining series of ball valves are 100% factory tested to 7MPa nitrogen pressure;

Oxygen Service Hazards

For more information on the hazards of oxygen-enriched systems, refer to the U.S. CHAVEZ Chavez Oxygen System Safety Technical Report, Q-CVS-030-2011;

Cleaning and Packaging

Products are 100% cleaned and packaged prior to shipment according to Chavez Standard Q-CVS-020-2011;

Specialty Alloys (all series)

Alloy C-276, Alloy B-2, Alloy 400, Titanium alloys and other materials are available for manufacturing, please call for details.

Safe Product Selection

When selecting a product, the overall system design must be considered to assure that safe, trouble-free performance is obtained. Function, material compatibility, adequate ratings, proper installation, use, and maintenance are the

responsibility of the system designer and user.

Packaging & Shipping

Customers feedback